Image resolution:

• 1920×1080 (1080P)

• 2 Megapixel / 5 Megapixel (Optional)

Minimum Illumination:

• 0.001 Lux (Color mode)

• 0.0005 Lux (B/W mode)

Lens:

• Fixed Focus TY-6047-A1

• Auto zoom (optional 4X optical zoom)

Wide Dynamic Range (WDR): Supports bright light, backlight compensation

Day/Night Switching: ICR Auto Switching (Built-in IR Filter)

Video Compression Format: H.265 / H.264 / MJPEG

Streaming:

• (S1) 1080P @30fps

• (S2) 360P @30fps

• Stream Range: 100 Kbps ~ 4 Mbps (CBR/VBR)

Image Settings:

• White Balance, Exposure Time, Saturation, Brightness, Contrast, Wide Dynamic, Sharpening, Noise Reduction, etc., can be adjusted remotely via AT command.

Network Connection: 4G LTE (supports FDD-LTE B1/B3/B5/B8, TDD-LTE B38/B39/B40/B41)

Protocol: TCP/IP, RTSP, FTP, HTTP, MQTT

Hardware Interface:

• TTL Serial (3.3V)

• USB 2.0 (up to 4608000 bps)

• SPI Interface (SPI_CLK_E, SPI_CS_E, SPI_MISO_E, SPI_MOSI_E)

• I2C（SCL/SDA 1.8V）

• SD card slot (supports local storage)

Dimensions:

• CAM_4G38 module: 38mm × 38mm

• Video Signal Processing Board: 38mm × 38mm

Power Input: DC 3.8V (Acceptable range 3.3~4.3V)

Features:

• 4G wireless communication (support remote streaming, RTMP live broadcast)

• AI intelligent algorithm (license plate recognition, fire recognition, smoke recognition)

• Ultra-low power consumption design (sleep power consumption as low as 0.7mA, 3-minute heartbeat power ≤18mW)

• Remote management (support AT command control, firmware upgrade)

Low power consumption applications:

• Support remote wake-up, USB Suspend/Resume

• Support AT command control hibernation, low-power mode

• Support hardware triggered capture/recording (e.g. infrared human detection, vibration detection)